Įvairių tipų liejimo mašinų savybės ir funkcijos.

Kalbant apieliejimo mašinos, tikriausiai dauguma žmonių neturėtų jaustis labai nepažįstami. Vadinamoji liejimo mašina iš tikrųjų taip pat gali būti vadinama įpurškimo mašina. Tai pagrindinė liejimo įranga, kuri naudoja plastikines liejimo formas įvairių formų plastikiniams gaminiams gaminti. Jį galima suskirstyti į daugybę skirtingų kategorijų pagal plastifikavimo metodą, mašinos perdavimo būdą ir veikimo metodą. Siekiant padėti vartotojams geriau išnaudotiliejimo mašinos, Tongjia Heavy Industries, a professional manufacturer of liejimo mašinos, will introduce the characteristics and scope of application of different types of liejimo mašinos in detail.
Pirmasis tipas: horizontali liejimo mašina
This is a relatively common type of įpurškimo liejimo mašina. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the liejimo mašinos on the market adopt this type.

Antrasis tipas: vertikalusįpurškimo liejimo mašina

In this type of įpurškimo liejimo mašina, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical liejimo mašinos are suitable for small liejimo mašinos. Generally, liejimo mašinos below 60 grams are more commonly used, and large and medium-sized machines are not suitable.

The third type: Angle įpurškimo liejimo mašina

The injection direction of the angle įpurškimo liejimo mašina is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal įpurškimo liejimo mašina, but the inserts placed in the mold are easy to tilt and fall. This type of įpurškimo liejimo mašina is suitable for small machines.

The fourth type: multi-mode turntable įpurškimo liejimo mašina

Tai ypatingaįpurškimo liejimo mašina with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of įpurškimo liejimo mašina gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.